The Clean Burn Model CTB-200 is the smallest of our waste oil boilers. With the CTB-200, you spend only 30 minutes cleaning every 750 hours of operation. This low-maintenance waste oil boiler is ideal for any sized facility because it can be used on its own or in combination with other Clean Burn boilers. Our products are perfect for a customized water heating option.
Three-pass heat exchange increased the heat efficiency
Low-mass water design provides a quick start-up
Patented burner is engineered specifically for waste oil
Pre-wired system makes installation quick and easy
Narrow cabinet designs offer flexibility for installation options
Unrivaled customer service offered by Interstate Energy
| BTU/hour input | 200,000/58.6 kW |
| BTU/hour output | 148,500/43.5 kW |
| Fuels |
Used oils:
Fuel oils:
|
| Heating Surface |
39 sq. ft./3.6 sqM |
| Design water flow per coil |
15 gpm/57 lpm |
| Cabinet Dimensions |
40" L x 29" W x 29.5" H 101cm x 84cm x 94cm |
| Overall Dimensions (with burner/breach/plumbing) |
59″ L x 33.25″ W x 37″ H 150cm x 84cm x 94cm |
| Approx. Weight | 677 pounds (304.7 kg) |
| Electrical Requirements |
115 VAC 60 Hz, single phase 3230C/50Hz units also available |
| Maximum oil consumption |
1.4 GPH/5.3 lph |
| Stack size |
8"/20cm |
| Air compresser required |
2.0 CFM @ 25 PSI 3.4 m3/h @ 1.7 bar |
| Recommended clean-out |
750 hours |
© 2025 Interstate Energy
Internet Marketing and Web Design by Real FiG Advertising + Marketing