The Clean Burn Model CB-1750 is the smallest option in our low-profile design. It produces approximately 175,000 BTU/hour. This design is perfect for businesses that don't produce as much waste oil on an annual basis. You can still reap the benefits of waste oil heating when you don't produce an abundance of oil.

  • Features

    Produces 175,000 BTU/hour

    Designed specifically to burn waste oil

    Heat exchanger creates a larger surface area to generate more heat

    Non-welded flue tubes extend the surface life

    Internal burner preheats oil to streamline combustion

    Simplified service with swing away burner

    Extended cleaning interval decreases maintenance needs

    Lower stack temperatures, higher heat output

    No fuel adjustment required

    Can be used individually, in combination with other furnaces or with Recycling Center

    Supported by Clean Burn Distributor, Interstate Energy

  • Specs

    *Maximum BTU/hour 175,000(51.25kW)
    *Maximum oil consumption 1.2 GPH (4.54 L/h)
    Fuels

    Used oils:

    • Crankcase
    • ATF
    • Hydraulic

    Fuel oils:

    • #2
    • #4
    • #5 fuel oil
    Air flow output (CFM)

    Unit heater 1700

    Central furnace (ducted)

    0.25 SPWC (in.) 1500

    0.30 SPWC (in.) 1400

    *Air compressor required

    2.0 CFM @25 PSI

    (3.4 m3/h @ 1.7 bar)

    Stack Size 8 inch dia. (20cm dia.)
    Furnace Dimensions, Assembled

    83.25"L x 29.25W x 31.5H

    (219cm x 74cm x 79cm)

    Approx. Weight 406 pounds (182.7 kg)
    Electrical Requirements

    115 VAC 60 Hz, single phase

    30 A circuit breaker

  • Resources

  • Compare