Clean Burn used oil burners are easy to install and seamlessly fit into any working environment. Whether you have limited floor space and need to loft your heating system or you're interested in a ducted system that leverages multiple units, Clean Burn has exactly what you need without the difficult installation process. Check out the gallery below to see how our clients have installed their units. Have questions about how a Clean Burn furnace or boiler might fit into your space? Give us a call to talk to one of our expert technicians.

Check out this installed Clean Burn heater.Another installed Clean Burn heating system.View this installed Clean Burn waste oil heater.Another fully installed Clean Burn waste oil heating system.View another Clean Burn waste oil heater.An installed Clean Burn waste oil heater.A fully installed Clean Burn waste oil heating system.This Clean Burn waste oil heater was installed by our technicians at Interstate Energy.Another installed Clean Burn waste oil heating system.

The Benefits Of Burning Clean

Interstate Energy is Colorado and Eastern Wyoming’s only authorized Clean Burn distributor. With top-of-the-line equipment and unparalleled service, you won’t find a better partner for a used oil furnace.

Why Clean Burn?

You have your options when it comes to used oil furnaces. The Clean Burn advantage can be seen at every point of ownership - from the sales support to the installation to the ongoing maintenance. You’ll find that high-quality is, quite literally, in our nature. All of our used oil furnaces and boilers are manufactured, not assembled, which means you’re getting the highest-efficiency product on the market.

Interstate Energy Is Your Partner For Recycling Used Oil

With Interstate Energy, you get a local resource who is dedicated to helping you get free heat for your business in the most efficient way possible. When you need service, we come to you. When you need parts, we ship overnight. When you have questions, we offer phone support 24/7. With Interstate, you get everything you need and more to support your Clean Burn system.

Thank you

Thank you for reaching out, we will be in touch shortly.

Service Confirmation

Thank you for requesting a service, we will be in touch shortly to set up an appointment.

  • Features

    Triple pass heat exchanger increases heat efficiency

    Quickstart design with low-mass water requirements

    Designed specifically to heat water using waste oil

    The pre-wired system makes installation easy

    Maximum flexibility due to narrow cabinet design

    Customer service supported by Interstate Energy technicians

     

  • Specs

    BTU/hour input 350,000/102 kW
    BTU/hour output 260,000/76.2 kW
    Fuels

    Used oils:

    • Crankcase
    • ATF
    • Hydraulic

    Fuel oils:

    • #2
    • #4
    • #5 fuel oil
    Heating Surface

    68 sq. ft./6.3 sqM

    Boiler Water Volume

    12 gal/45.4 L

    Design Water Flow per coil

    12 gal/45.4 L

    Cabinet Dimensions

     

    56" L x 34" W x 34.5" H

    142cm x 86cm x 88cm

    Overall Dimensions (with burner/breach/plumbing)

    74" L x 39.25" W x 41" H

    188cm x 100cm x 104cm

    Approx. Weight

    1240 pounds (562.4 kg)

    Electrical Requirements

    115 VAC 60 Hz, single phase

    230C/50Hz units also available

    Maximum oil consumption

    2.5 GPH/9.5lph

    Stack size

    8"/20cm

    Air compressor requirements

    2.5 CFM @ 25 PSI

    4.25 m3/h @ 1.7 bar

    Recommended Clean-out

    1000 hours

  • Resources

Schedule A Free On-Site Consultation

Form by ChronoForms - ChronoEngine.com